Wireless Rearview Observation Mirror Dashcam RD10

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Haloview Wireless Backup Camera Rearview Observation Mirror Dashcam RD10

96% of 100

111 Reviews Add Your Review

$369.99

In stock

Provides interference-free reception for vehicles up to 80 feet guaranteed at high speed. Pair before installing

Up to 1200 ft wireless line of sight wireless reception range in open spaces

The front camera captures an ultra-clear image at a resolution of 1080P

Easily mounts over your existing rear-view mirror with the provided rubber strap

An IPS full touch screen is easy to operate with fast responsiveness

Recording important events with the built-in DVR

Adjustable rear assist marker lines help you backing up properly

Split/PIP mode available on the 10" screen and displays up to dual cameras views

The rear camera comes with a Furrion camera mounting bracket adapter plate

Only support one wireless camera signal input, compatible with CA108/CA109/CA613T/CA614T/CA615T/CA616T

Length options for external cable: 3m,5m,8m,10m,12m,15m

Note: The image won't be displayed completely under a single split-screen(ex.CAM1) due to the width vs depth of the 10" mirror monitor will limit the vertical view, you need to slide up and down the screen if you need to see the image of other angles. But it will display all under 2 splits screen(ex.CAM1&CAM2).

Details

The wireless rearview observation mirror dashcam system RD10 has a front-facing camera and a waterproof exterior rear-facing camera that is perfect for Trucks, Buses, Trailers, Campers, RVs, Vans or other large cars where rear visibility is obscured! It can securely in place over your existing rearview mirror, and provide the exact same functionality as a backup and dash camera, the display can also act as your new rearview mirror when not using.

The front camera can be extended out from the rear mirror monitor to capture the front scene. The view angle of the camera can also be adjusted by rotating the lens with your hand.

mount the RD10 over existing rear mirror

Nothing else mounted to your windshield! This dashcam fits over the factory rear-view mirror without disassembling. Simply bind the RD10 monitor to your existing rearview mirror with the rubber strap.

A user-friendly touch screen allows you easily to Start/Stop recording, Screenshot and Switch front/rear cam images. You can see the screen clearly even with polarized sunglasses.

Using RD10 Mirror Dashcam for a Confident Ride.

A 32G SD card is included in the box. Featuring Ultra-HD 1080p forward-facing video recording via dashcam and 720p HD rear-facing video recording via a separate backup camera.

Full/split-screen or picture-in-picture display of front/rear view. Turning off the screen display, it can be used as a regular rear view mirror.

Rear assist marker lines adjustable as needed helps in accurate distance measurement for parking to avoid collision and scratch backward.

The combination of TX-BOX and extension cable bypass most obstacles cuts down the distance that the signal has to travel, which ensures a constant signal reception.

waterproof and night vision backup camera

6 infrared lights capture sharp videos with enhanced details at the extremely low light conditions. Make it a trustworthy guardian for your car all day and night.

The installation is a breeze with the provided U support bracket or Furrion mounting bracket adapter plate.

How to install

Specification

Monitor

Screen Size	10"
Video Recording	Yes
Resolution	1920 x 3(RGB) x 320
Micro-SD /TF Card	Max. 128G
Video Format	MPEG4
Adjustable Parking Line	Yes
Brightness	800 cd/m²
Channel	2 channels Max
Split Mode	Yes
Power Supply	DC 5V (Note: You have to use the provided cigarette lighter to step down the voltage from 12-32V to 5V.)
Outer Dimension	255mm(W) X 72mm(H) X 18mm(D)

Front Camera

Resolution	1920 x 1080
Viewing Angle	140°
Image Device	1/2.8" Sony CMOS
Microphone	Yes

Rear Camera

Support TX-BOX	Yes
Resolution	1280 x 720
Viewing Angle	130°
Image Device	1/2.9" CMOS
Microphone	Yes
SMART IR-CUT	650nm Day/850nm Night Auto
Waterproof rating level	IP69K
Transmision Distance(barrier free)	1200ft
Night Vision Distance	32ft
Latency	200ms
Power Supply	DC 10-32V

What's in the box

RD10 Rear View Monitor x 1
Rear View Camera CA614 x 1
IP69 Waterproof TX-BOX T1 x 1
32G Micro SD Card x 1
Cigarette Lighter x 1
DC 10-32V Power Cable x 1
BMW Connector Adapter x 1
U-support Bracket for Camera x 1
Furrion Adapter Plate x 1
12M(39ft) Extension cable x 1
Wire Fixture x 18
User Manual x 1

Video

Wireless RV Observation Mirror Dashcam by Haloview

RV Back Up Camera UPGRADE // Haloview RD10 Install & Review

This is the COOLEST RV backup cam! Haloview RD10

Haloview RD10 Rear View Mirror Mounted RV Camera System | Wireless Rear Observation Cam + Dash Cam

Haloview RD10 RV Rearview and Dash Cam

Haloview RD10 Wireless Rear camera & Dashcam TOO

Unboxing Haloview (RD10) newest Wireless Backup Camera RV product unboxing

The BEST RV Wireless Camera/Dash Cam ON THE MARKET! Haloview RD10!

Haloview RD10 Installation and Review

Reviews 111

Write Your Own Review

You're reviewing: Haloview Wireless Backup Camera Rearview Observation Mirror Dashcam RD10

Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Summary

Review

Add your photos (jpg, jpeg, png)

Download

User Manual

Firmware

RD10 Upgrade Steps:

1. Insert the SD card into the PC, select “filesystem”: FAT32 to format unit size: 64KB

2. Copy the upgrade pack "SD_CarDV.bin" to root directory of the SD card

3. Insert the SD card with upgrade pack into the monitor, then power it on

4. After starting up, the system will read the upgrade pack of SD card automatically and enter the upgrade mode (Attention: don’t power off when it is upgrading)

5. When the upgrade is completed, the system will restart automatically. The VERSION under the SETTING menu has been updated to: MC10-00-V2.2 now

Q&A

I have a Ford f250. There is an accessory switch and lighting console directly above my mirror. It appears that the antenna on the monitor for your product would not fit properly into that space. Is there a workaround or alternative?

(0)

By Thomas LaPorta on

21 November, 2022

It includes a 90 degree elbow antenna for rear view mirror monitor, 11/16 inches higher than the monitor if the antenna installed.

By Haloview Team on

25 November, 2022

Is there an upgradable team camera option with at least 1080p for this system?

(0)

By Ben H on

08 August, 2022

We will possibly upgrade it to 1080p in the future.

By Haloview Team on

08 August, 2022

I have an RD7 setup. I'd like to have the option of having a camera on truck and on trailer but not at the same time. Is it possible to pair the camera on the trailer and another camera on the truck without having to push the pair buttons each time?

(0)

By Oscar on

28 June, 2022

NO, RD10 only supports one wireless camera, you have to do re-pair everytime use another camera.

By Haloview Team on

30 June, 2022

When will the RD10 be available?

(0)

By Jim on

29 May, 2022

It will be available in late June.

By Haloview Team on

01 June, 2022

Are there more than two cameras allowed at the same time? I would like to add a CA109 for three cameras total.

(0)

By David on

14 April, 2022

No, it only supports one wireless camera signal input.

By Haloview Team on

15 April, 2022

SKU

RD10

Category

Products, Wireless Backup Camera Systems

Contact Us

Follow Us On Social