Haloview CA116 Wireless RV Rear/Doorway Security Camera

$116.99
In stock
  • Recommended for vehicles under 33ft, compatible with M5111, M7108, M7109, and RD7 series Monitors
  • Provides interference-free reception for vehicles up to 33 feet guaranteed at high speeds
  • Up to 984 feet wireless line of sight wireless reception range in open spaces
  • Featuring a smart IR cut, IP69K Waterproof, 120-degree Angle Lens night vision camera
  • A microphone built-in the camera picks up sounds which make reversing safer
  • The semicircle bracket provides a waterproof housing for the RV rear/doorway security camera
  • Note: the circle magnet is not included in the package.
  • - +

    You May Also Like

    Details
    Haloview wireless rv observation backup camera
    MC7109P 720P high resolution camera

    Captures 720P HD footage in wide-angle, nothing important runs out of the frame

    MC7109P backup camera with microphone

    The camera also transmits audio from the area of camera to the monitor side

    MC7109P wide angle camera

    A 120° wide-angle view eliminates most blind spots when driving or reversing

    MC7109P IP69K waterproof camera

    With an IP69K rating level, the camera works in all weather conditions

    MC7109P night vision camera

    6 infra-red lights ensure a perfect view even on the darkest night

    MC7109P wireless backup camera

    The camera CA116 wirelessly transmit video in a constant signal

    RV Security Camera

    Turn it into the RV entrance door security camera. Being able to watch the kids or see people coming up to the RV entrance door or animals wandering within the perimeter of view, gives you peace of mind at the campsite.

    RV Rear Camera

    The semicircle rear camera provides a perfect view of the vehicle's rear surroundings so you can back up safely. Simply replace the existing Furrion prep bracket with it on your RV and use the same wiring.

    rv wireless security camera and rear camera

    EASY & QUICK INSTALLATION


    semicircle camera installed on furrion pre wired rv

    Simply remove the Furrion prep bracket and mount the semicircle bracket on the same holes, use the included Furrion power cable adapter to easily connect and power the camera through the Furrion wiring.

    semicircle camera installed on fiberglass/aluminum rv

    The semicircle bracket compatible with the circle magnet M3, you can mount it on a metal body RV in minutes without drilling holes. Metal plate is needed for the fiberglass and aluminum RV.

    drilling holes install security camera in rv

    An alternative installation method. Find a perfect spot for getting power supply and drill holes to install the security camera on the back of your RV.


    Easy quick install security cam in your rv with Haloview semicircle mounting kit

    • The Haloview semicircle mounting kit provides two installation methods, drilling holes or using magnet attach on your vehicle. (the circle magnet and metal plate are not included in the package)
    • The semicircle bracket provides a waterproof housing for the camera.
    • Compatible with Furrion mount pre-installed RVs.

    rear camera with semicircle bracket

    What's in the box

    • CA116 Rear/Doorway Security Camera for RV x 1
    • DC 10-32V Power Cable x 1
    • Furrion Adapter Cord x 1
    • User Manual x 1
    What's in the CA116 box

    Specification

    Support TX-BOX No
    Resolution 1280 x 3(RGB) x 720
    Viewing Angle 120°
    Image Device 1/4" CMOS
    Microphone Yes
    SMART IR-CUT 650nm Day/850nm Night Auto
    Waterproof rating level IP69K
    Transmision Distance(barrier free) 984ft
    Night Vision Distance 32ft
    Latency 200ms
    Power Supply DC 10-32V
    Video
    Reviews 3

    Write Your Own Review

    You're reviewing: Haloview CA116 Wireless RV Rear/Doorway Security Camera

    Download

    Camera User Manual

    Q&A
    You're Question for : Haloview CA116 Wireless RV Rear/Doorway Security Camera
    Please type the letters and numbers below
    What is the power consumption of the CA116 camera?
    By Mike James on
    25 October, 2021
    • Under normal mode, CA116 the current is 240mA@12V when the IR LEDs do not work; when the IR LEDs work, it is 340mA@12V. IR LEDs are for night vision.
      By Haloview Team on
      27 October, 2021
    SKU
    CA116
    Category

    Money back
    Money Back Guarantee

    1 year warranty on cam systems

    Contact us
    Excellent Customer Support

    Live chat, email us!

    Sidebar